Monday, September 2, 2013

The Last Trip

The 9th of May was both a sad and exciting day for me.  This was the first day of a long journey (2,452 NMs) to deliver my “mistress” to her new owner in Hillsboro, Oregon.  The previous night I had the plane topped off with fuel and parked it on the ramp outside of Aero-One Aviation (KDHN) in preparation for my early departure.  I had intended to get up early and be airborne by 0600 to ensure I had plenty of time to navigate any weather and to allow me to get to Fort Collins, CO to visit with some friends.  As I arrived at the airport, I quickly realized that I was going to be stuck on the ground for a while since heavy fog had rolled in and visibility was too low to take off. 

On the ramp at Dothan, AL

Awaiting the fog to lift
After waiting for a little over an hour, a Baron taxied by did its run up and took off.  I could barely see the aircraft as it passed by me on the runway, but the pilot reported that the tops were only at about 50’ now and that the runway visibility was broken.  This looked promising to me, so I jumped in, started her up and taxied to the end of RW 32.  After conducting my run-up, I received my clearance, taxied onto the runway and took off at 07:19am.  Sure enough, I rotated and before I knew it, I was above the fog in perfectly sunny skies!  My first leg of five for this trip was to Shreveport Downtown (KDTN) 495 NMs to the West.  Originally I was hoping to fly a more direct route, however bad weather over Kansas City didn’t support this, so I decided to go to the west before cutting north and try to stay clear of the thunderstorms and try to get behind them.  My flight time to KDTN was 2:53.  This leg was relatively uneventful as I cruised along at 10,000’, however there was a cell moving from west to east towards Shreveport and as I approached the clouds started to build.  The closer I got, the worse it got and about thirty minutes out, I was in the clouds and had to shoot a localizer approach to RW 14.  The approach went fine, but the clouds were almost to minimums which made it important to get gas and get out of there quickly.
Leg one - Dothan to Shreveport
After arriving at KDTN, I got fuel and found out that there was a nice little cafĂ© in the terminal of this airport, so I went in and got a decent breakfast before heading out for Leg 2.  This leg would be to the Northwest to Great Bend Municipal (KGBD), Kansas via the PGO VOR, which I chose as a waypoint to direct me away from the approaching storm.  After quickly eating breakfast and getting fuel, I departed on RW 14 in ever dropping ceilings and did a climbing right turn up into the clouds and direct to PGO.  What was interesting about this is that I entered the clouds at around 500’ and was then in solid IMC up until approximately 9800’ where I broke out just prior to my assigned 10,000’ cruise altitude. 
Just reached cruising altitude
 
Leg two - Shreveport to Great Bend
This second leg of this trip was also fairly uneventful with a flight time of 2:46 minutes and 505NMs.  Only as I reached my destination did things start to change.  About thirty minutes from Great Bend the sky opened up to just broken clouds and the air started to get a little more turbulent, which is fairly normal as the day goes on and the temperatures rise.  As Kansas City Center (KCC) started to bring me down, they told me to expect the visual.  Shortly thereafter is when my communications started to act up.  The lower I got, the more broken KC Center became.  At one point, KCC reported the airport to my 1200 and 15-miles, to which I reported that I was VMC and looking for the airport, however very shortly after that I lost all communications with KCC.  I continued to call to cancel IFR, but didn’t get any response.  At two-miles from the airport I was still at 4000’ and almost on top of the airport.  I had reported that I had the airfield in sight and wanted to cancel IFR, however I had no communications with KCC, so I chopped the throttle and turned to the Southwest and entered a short approach to land on RW 35.  My thought process was that I had already reported that I was VMC and after that call I had reported numerous times that I wanted to cancel IFR, so I figured I would just land and immediately call KCC and report that I was safely on the ground and that I had lost contact with them.  Being that I was VMC, I felt this was a safe move and all would be fine.  However…

Shortly after landing and taxiing in to the FBO, I shut down and the lineman gave me a piece of paper and told me that I needed to call KCC immediately (shit).  I then called KCC and was told that they were "confused as to what my intentions were" and that I broke regulations by doing what I had done.  He did confirm that they had heard me say that I was VMC, but couldn’t understand why we had lost comms.  I was informed that they had great coverage in that area and that there was no reason for me to not be able to talk to them.  I explained my rationale and everything seemed to be ok.  The only thing that I think I could have done better was to squawk 7600 (no radio) on my transponder to let them know that we had lost comms.  Had I done that, it probably wouldn't have been an issue - lesson learned.  I guess I was busy trying to figure out how I was going to lose all the altitude and not overfly the airport.  At the time that was my logic, but now it's just pretty silly and I should have known better.
After my brief discussion with KCC, I took the courtesy car into town and got some lunch.  One of the cool parts of this trip was the fact that this airport used to be a training base for B-29s during WWII.  There was a pretty cool monument on the airfield as well as some of the old buildings and one of the huge hangers still there.  It’s a shame that there isn’t more stuff there to look at, but the fact that I found this accidently is still pretty cool. 
B-29 Memorial
After a late lunch, I departed on my last leg of the day at 1601 for Fort Collins Regional (KFNL), flight time 2:26.  This would be the hardest part of the trip due to weather concerns.  While the clouds were broken at KGBD, I departed VFR in VMC and started my climb up to 10,000’ again.  I called KCC to pick up my clearance in the air and once again, no contact until I was up to 6,000’.  The controller seemed a bit curt with me, but I received my clearance and all was well. 
Leg three - Great Bend to Fort Collins
Shortly after reaching 10,000’ I noticed more and more cells building and I also noticed the cloud layer below me slowly climbing.  Since it was late in the day the build-up was starting to tower, making things a bit more interesting for me and forcing me to ask for a lot of deviations.  I figured that since I was going West altitude would be my friend, so I put on the oxygen cannula and asked for 12,000’ and then eventually 14,000’.  As I climbed and flew west the clouds continued to rise above me.  This would have been fine except for the fact that as I continued west, I started to hear PIREPs of planes picking up ice.  The last thing I wanted to was get stuck at 14k’ or higher and then have to descent through 10,000 feet of solid icy clouds, so while I still had a few holes, I asked to descent to 8,000’ and latitude to deviate both left and right to get through the clouds.  I was cleared to descend and down I went.  I picked my way around and for the most part stayed out of the clouds, however there was one small benign looking cloud that I couldn’t avoid and as I went through and the entire plane instantly had a thin layer of ice on it.  I turned on the TKS anti-ice system and then was out of the clouds before I knew it.  The TKS cleaned up the wings and windshield really well and I continued on.  From that point I took some vectors and then was put on an arrival procedure to Fort Collins Regional Airport.  By the time I got there, it was fairly clear with patches of build-up and I landed without any issues to complete my leg of 367NMs.  Welcome to Colorado, another state off the bucket list.
MFD/NEXRAD appears fairly clear...  Notice how tight the cells are (NOT good).  This is a great example of how NEXRAD can give you a false sense of security!

10 MAY - Day Two
After a great but quick stop overnight to see an old Army buddy, I departed Fort Collins Regional for the 2:26 minute flight to Ogden-Hinckley (KOGD).  The morning was perfect, clear skies and almost no wind, so I knew that flying over the Rocky Mountains would be pretty safe and relatively easy.  After conducting preflight and taxiing to the end of the runway, I called Denver Clearance to pick up my clearance.  Even through KFNL was an uncontrolled airport, it was right next door to KDEN, so you have to call them for your IFR clearances.  My plan was to depart to the north to the Laramie (LAR) VOR and then follow V85 to Medicine Bow (MWB) VOR, then V6 westbound to Ogden at 10,000’ except at Fort Bridger VOR I would have to climb to 12,000’ to clear the mountains.  Being that I have built in oxygen in the Cirrus, I could easily climb higher, but heading west you have lots of wind and I don’t care to wear the cannula if I don’t have to since they are kind of uncomfortable.  From my perspective, even though I was “crossing the mountains” it should be a pretty easy leg to fly…

Leg four Fort Collins to Ogden
I called for my clearance and that is when all the confusion began.  Since this was a busy area, I should have known that I wasn’t going to get what I wanted, but at the time it didn’t dawn on me.  Approach wanted me to depart KFNL and fly south to the DEN VOR, and then to the east before going north.  My clearance was read super fast and after the controller said DEN VOR, I was like WTF.  As I tried to digest this, I asked the controller why I was flying so far south, when I planned direction of flight was north and it would keep me away from the busy Denver airport.  I was told to stand-by and so there I sat with the engine running looking at the beautiful rocky mountains for about 5-minutes.  The controller then came back and asked if I could immediately climb to 16,000’ direct Cheyenne (CYS), to which I replied no and was told to stand-by again (apparently he must have thought I was a Turbo).  Finally after about 5-minutes he came back and said that if I could do immediate climb to 14,000’ direct LAR VOR, V85 to Medicine Bow (MBW), then V6 to Cherokee and to OGD, that would be the closest he could do for me.  I repeated the clearance and blasted off runway 33 at 8:44am to the north and put on the cannula as I climbed. 
Fort Collins

Me with Cannulas
 
 
Crossing the "first" pass
The entire climb was gorgeous with the mountain range off my left wing and the air was cool and smooth.  I couldn’t have asked for a better morning to fly!  As I reached LAR, my clearance got changed again and I was told to follow V4 to OCS, FBR then on to OGD.  I cruised along at 14K for almost two hours taking pictures like a tourist.  I was concerned about flying the mountains, but in all reality, there really wasn’t anything to worry about along that route.  The pass was low and the area really wasn’t all that rugged.  After getting past the first pass, the terrain smoothed out and it was really easy going. 

 
 
 
From 14K, it was REALLY easy going.  Just shy of the mountain range at Ogden, I came down to 12,000’ and shortly thereafter I crossed the mountain range and got vectors to the north trying to get me down from my altitude.  It took me a while to lose all that altitude, but eventually I got directed into the airport to land on RW 21.  Flight time was 2:26 minutes and 442NMs. 
Ogden on the other side of the mountains

Crossing the range

Hill AFB in the distance

Ogden-Hinckley Airport

Over the edge of the Great Salt Lake loosing altitude
The Ogden-Hinckley airport is a busy, but really nice airport.  With the mountains right behind it, this has to be one of the most beautiful areas I have ever flown.  I stopped at Ogden Mountain Valley Aviation to get fuel and to get some food.  Right next door is the terminal (that also has commercial service) and has a restaurant, but I quickly found out that it was way too busy to get any food at and I needed to keep moving so as to keep my timeline.  I ended up having to get a bunch of junk food out of the vending machines and depart.

Leg two - Ogden to Hillsboro
Great Salt Lake
The last leg of my journey started at 11:51 as I departed KOGD for Portland-Hillsboro.  This would be the longest leg of the journey at 643NMs and a flight time of 3:23.  I had originally intended to stop at Boise since that is where my journey with N779WC had begun several years earlier, but I was on a timeline to get the plane to Hillsboro to its new owner, so I just decided not to stop.  This part of the journey was by far the prettiest of the entire flight.  Departing over the Northeast side I flew to BYI VOR via the V101 airway, then V4 to BOI, then V500 to UBG with radar vectors into KHIO.  I flew the entire leg at 12,000’ and enjoyed a spectacular view of Mount Jefferson, Mount Hood, Mount Adams and even a glimpse of Mount Rainier way off in the distance.  It was a beautiful day to fly with only a few scattered clouds and smooth air.   It was a great leg with no issues and I could just take in the beautiful views and continue to take photos like a tourist. 

Mount Hood




As I approached KUBG, Portland Approach gave me vectors to KHIO and things begin to get busy quick.  As I got closer, I tuned in to KHIO tower and noticed that it was an extremely busy airport with a lot of foreign student pilots not only trying to figure out how to fly, but also trying to articulate English for the tower.  At one point, Approach gave me an immediate 90 degree left turn to avoid a PC-12 and then vectors back to the airport.  As I switched over to tower my traffic started going crazy with “bogies” all over and a little uneasiness came over me as there was an awful lot of student traffic everywhere.  I landed without incident in what I would have to say was a perfect landing on RW31 and I taxied over to the FBO to see the new owner standing outside waving.  At that point reality set in that my beloved Cirrus was now someone else’s.   Although this was very sad, I was also excited at the same time because I could tell that the new owner was just as excited as I was the first time I saw N779WC, and I knew that he and his family were in for a special journey and that they would enjoy her just as my family and I have.
Portland, OR

N779WC was a fantastic aircraft for my family and for our travels.  I flew her 619 hours and landed in 39 different states in just over three years.  I learned a lot about true cross country flying, dealing with weather, flying actual IMC, and I learned a lot about myself.  Although the journey wasn’t cheap, I still believe that it was worth every penny!  For those that read this and think “owning a plane is too expensive” in all honesty it really isn’t all that expensive.  There are many variable and there are opportunities for things to be expensive, real expensive.  However if you do the research and by the right plane, its really not all that bad.  However in my opinion you do need to fly more than 100hrs a year to truly make it financially feasible, but then again that depends on what you get for an aircraft.  The shear freedom to be able to take off at a moment’s notice and go wherever you or your family wants to is truly priceless.  I was able to take my family on many trips to more places then I could have ever dreamed.  We did trips that were impossible by car, or just flat out too expensive to do by commercial air.  The freedom to travel without your kids getting molested or radiated in commercial airports was more than enough reason to own a plane in itself.  The experiences you gain as a pilot is invaluable and truly sets you apart from those that just “stay in the area.”  So as you can expect, there will be another plane in this family again and hopefully another Cirrus someday – no question about it!
N779WC in her new home
 

 

 

Sunday, August 4, 2013

FAA Announces Revised Part 23 Regulations

As reported by AVWeb, see link below.  The FAA has released information on how it plans on streamlining the certification and approval process for general aviation aircraft under Part 23.  The idea is that it will allow airplanes to be certified faster and cost less (50% reduction in both) all while allowing for greater safety.  Allegedly this refined process will more easily allow manufacturers to install things like “angle-of-attack sensors, two-axis autopilots, glass avionics, and other important safety-enhancing systems that can aid the pilot”, which in the past has been extremely expensive to do for manufacturers and has driven the cost of new airplanes through the roof. 

While I’m a huge fan of anything that will reduce the costs of GA and help promote more flying, I fear that this will do very little for the consumer and instead provide more profit for the manufacturers.  As a previous Cirrus owner, it kills me to see the fleecing manufacturers provide on parts for their aircraft and all in the name of “certification.”  When a company demands $10,000 (soon to be $15,000, but that’s a whole different story) to repack a parachute, yet the actual manufacturer of the same chute will repack it for $3500, you have to ask yourself why?  Of course, Cirrus has made it so that no one else is allowed to repack the chute because of “certification” reasons, it’s a self licking ice cream cone for Cirrus and one of the reasons I sold my aircraft.  I loved the Cirrus and I think it’s easily one of the safest aircraft on the market, but they have followed the trail of Beechcraft and have absurd markups on all of their parts making owning one for the rich and famous only.  GA will not expand until the prices of the aircraft come down.  Especially in a horrible economy that this moron in charge has created, GA is barely hanging on as more and more manufacturers of planes and parts go out of business.

We can only hope that this new revision of Part 23, will change things for the better of GA, but regardless the results will probably take ten years to see if it actually makes a difference.  The new proposed revision is supposed to be complete by July of 2016.  Fingers crossed…

Friday, May 24, 2013

Cirrus CAPS



The system works and the statistics prove it.  100% when used within the design parameters!  It isn't a gimmick and gives pilots one more option that could save their lives and their passengers in the event that something bad happens.  Great video Cirrus!!

The Next Step

It has been a while since my last post and much has happened pertaining to my Cirrus and flying.  I have had my Cirrus up for sale for the past couple months and have a lot of “lookers” or “tire kickers” and on two different occasions got to the point of taking it in for a prebuy inspection, only to find out the lookers had another aircraft in contract.  I even had one person accuse me of not knowing what I was flying and told me that my aircraft was “not a GTS, because Cirrus didn’t make a GTS in 2004.”  Luckily for me he was an idiot and didn’t pursue the aircraft because he obviously has no clue as to what he was talking about (yes Cirrus made a GTS in mid 2004 and mine was a late 2004).

As of a couple weeks ago, I sold the Cirrus to its new owner in Oregon.  I had a great final flight delivering her and I’ll write a post on that shortly.  It is very sad to see her go, but the time had come for some life changes and we just couldn’t keep her.  I’m positive that there will be another Cirrus in this family again because it truly is one of the best and safest GA aircraft on the market!  It is by far the best plane for the money on the market right now (new or used) and quite frankly I just can’t see ever owning something like a Mooney, Bonanza, Piper, or Cessna because they are all outdated, small and can’t perform like a Cirrus – AND none of them have the safety of the chute!  Not bad mouthing these aircraft because they are all great planes in their own ways, but none of them come close to the total package of a Cirrus for the mission I had.

So now that the plane is gone, what’s next?  Well it’s time to continue my flying education and start seriously working on my commercial and multi ratings.  Both should be extremely fun, but the multi-rating will be tough because not only is it ridiculously expensive, but it’s extremely hard to even find a twin to rent!  What’s even harder is that I’m now really comfortable with “glass” and don’t want to step back into an old antiquated steam gauge cockpit, so my options are very limited if not impossible.  It should be an interesting adventure, but I look forward to pursuing it and I’ll post about it as I go.

Monday, February 4, 2013

States I Have Flown In


I have been extremely busy as of late with work and life, so I haven't had a chance to get on here and post anything cool in a while. So for my first post of the year, I thought I would share with you this map of all the states that I have flown to and landed in to date. Part of my "bucket list" is to land a plane in all 50 states in this great country. If I can pull off all 50 in a Cirrus, that would be even cooler yet, but we'll see. Of all the states so far, all 33 have been with a Cirrus so I'm off to a pretty good start, but Alaska and Hawaii are going to be tough to do but we'll see.

As you look at the map you will see two states surrounded by green that I have apparently missed. The first one is Vermont. Two summers ago, I took my family out to Ft. Drum, NY on business and in the process we attempted to hit all the states we could while we were there. The on the morning that we attempted VT, it was very windy and turbulent and as I set-up to land, my wife was NOT having a good time. Because of this, I aborted and we climbed back up to smoother air and hoped to attempt it another day. Unfortunately due to bad weather and short on time, we never got back up there and had to return home. This summer I once again went back to Ft. Drum, but like the first time the weather turned really bad and I was not able to attempt it safely, so I just came home.

Maryland is the other state that I missed, but this time it was purely due to poor planning. On that same trip last summer, I plotted out a fun route up the east coast both IFR and VFR to ensure that I hit all the states on the coast. It was executed flawlessly and was a fantastic trip. Upon arriving back home and working on my logbook, I noticed that I had picked an airport right on the border of Delaware that was just to the north and NOT IN MARYLAND. I was pissed to say the least, but it was a great adventure and now I will just have to find another excuse to go back and try again!

This summer I move again and this time to the West coast, so WA, OR, CA, NV, UT watch out, I’m coming to get you very soon!

Saturday, December 29, 2012

Picking up a pimped out Cirrus


Had the great privilege of helping out a fellow Cirrus owner by picking up and flying his aircraft home after getting some work done. The plane N60034, a 2003 Cirrus SR22 G1 was just completely pimped out to look better than a new Cirrus. The owner had the plane painted, interior completely redone and had a new four-blade MT propeller installed.



Midwest Aircraft Refinishing strip and repaint the entire aircraft. The quality of the paint job is like nothing I have ever seen before. It has numerous fades and color variations and all the colors have a little metal fleck in them, which really looks sharp. All stripping and numbers are painted (no cheap vinyl here) and then a final clear coat is applied to make the entire plane look wet. TRULY AMAZING! It’s not to say it’s perfect, but the flaws are few are unnoticeable unless you really look for them. Regardless, this paint job is better than any new Cirrus I have ever seen and better than any aircraft paint job I have ever seen! I would love to do this to my Cirrus!



SCS Custom Interiors in Duluth (the same manufacturer that does the factory Cirrus interior) replaced all the seat covers and foam as well as added new leather armrests and leather wrapped yokes and renovated the old plastic to look new and colored it black. The seat covers were custom designed to the owners specifications and were reshaped to look like the new G3 version and had suede inserts added to the design.  The plane also received a new suede headliner and a Cirrus G3 bolster and center console panel was installed.

Finally Midwest Aircraft Refinishing also installed a new MT four-blade composite propellor to round out the package. This was a great add-on not only for looking amazing, but for also being 27 pounds lighter, it helps increase the useful load of the aircraft. This propeller also makes the plane a little quieter and takes out some of the vibration. Performance wise, the plane seemed to climb a bit better and also aided in slowing the plane down a bit if you chopped the throttle. Not really beta, but kind of like that when at speed.


Prior to having all this work done, the owner also upgraded all the G430 com/navs with the new Garmin GTN650s and is looking at getting a DFC90 installed next month. With all the work he has done to this aircraft, you have to wonder why anyone would want to buy a new aircraft. This aircraft looks, smells and performs just as good as a new 2012 Cirrus and is every bit as capable, yet total cost is a quarter of a new one! I had a great time picking it up and flying it home from Wisconsin and I’m guessing this will be the closest I will ever come to actually flying a “new” aircraft.  Thanks for the opportunity Justin!

Saturday, December 1, 2012

Size Does Matter

The new Apple iPad Mini
After a couple of weeks of flying cross country in some good IMC, I am completely sold on the new Mini. Although technically there really isn’t much different about it other than being smaller and the LTE cellular connectivity; size does matter. I have been using an iPad for flying (mainly as a backup) for almost two years and it has completely changed how I do preflight, flight plan, navigate, and maintain situational awareness while flying. The more I use the iPad and Foreflight, the more I like it because it’s just such a great tool for pilots. The new Mini just seems to make it that much better because the size is more convenient for the cockpit. It’s basically the size of a typical kneeboard and doesn’t clutter up your lap/cockpit as bad as the full size iPad. I haven’t had any issues with reading approach plates, sectionals or IFR charts. I put it through its paces several times when ATC would give me reroutes and I would have to figure out my clearances with Foreflight before programming the navigators and it all works great. Like I said, there really isn’t anything new about it other than size, but the size just seems to work better (at least for me) in the cockpit.

I used the iPad Mini on several flights without any case and I love how thin and tiny it is, but quickly realized that it does need to be in a case to protect it just in case it slides off the lap onto the floor. I researched cases at all the major electronic stores as well as on line and found that once again, Otter Box had the best case. I purchased my Otterbox Defender case on Amazon for $45.33 with free shipping.

http://www.amazon.com/OtterBox-Defender-Series-Hybrid-Case/dp/B009WU5XUG/ref=sr_1_5?ie=UTF8&qid=1354423762&sr=8-5&keywords=ipad+mini+case

This was $20 cheaper than anybody else and the case is awesome. The overall dimensions are still pretty small, but the rubber silicone outer shell keeps the iPad Mini from sliding around. The case really protects the Mini well and definitely worth the money!

If you are looking at purchasing an iPad for flying, I would look very hard at the Mini. I use it all day for surfing the web, e-mails, Facebook, book reading, etc and love it. It’s easy to carry around and fits in the coat pocket. Once again, thanks Apple for another great product!